110型PVC水拉条造粒
用途：该设备适合小产量造粒，日产量8吨左右，上下机一体直接拉丝造粒（要求物料干净无杂质）塑料造粒机用于各种塑料造颗粒使用。
特点：
1 螺杆精心研发设计，整机及各零部件配备合理，线路均采用三火一零加热。
2 螺杆针对料子特性而设计，产量高，做出的料子光泽性好颗粒饱满，整机配置加大，增加设备使用寿命，外观合理化设计，有独特的美感。
3 该设备合理的设计增加生产量，做出的产品价值更大，减少工人维修时间，降低维修成本。
4 造粒机具有高产量低能耗的特点，配备大扭矩减速箱及电动机，本机螺杆经过特殊设计，具有无死角不卡铁效果，有效提高了产能，增加塑料塑化效果，
设有单排气、双排气结构，干料、潮料、水洗料均能充分排水排气，使颗粒结实饱满光泽度强。
5 高质量的电气与驱动设备，使机器设备在使用中更加安全可靠。
Use:The equipment is suitable for small output granulation, daily output about 8 tons, up and down machine directly drawing granulation (material clean without impurities)The plastic granulator is used for various plastic granulation
Features:
1:Forced feeding hopper is used to ensure materials are cut evenly,less labor and high output
2:The feeding theroat of the main engine ang the plasticizing segment are heatde withe electromagnetic heating.Dry plastic matrrial and wet plastic material can be used to granulate
3:Screws are carefully designed and developped by engineers. The entrre machine and every component are fully equipped. The heating circuit uses three fire line and one zero line
4:The screw is designed for features of materials withe high output.The material processed is glossy and plump-eared. The complete machine configuration increases to extend the service life of the equipment
5:The granulator has the characteristics of high output and low energy consumption. It is equipped withe a large torque reduction gearbox and an electric motor,The screw of this machine has been designed and developed,and has the effect of no dead angle and no iron.It effectively improves the production capacity and improves the plasticizing effect of plastic.Exhaust,double exhaust st「ucture,dry material,damp material, water washing material can fully d「ain and exhaust,so that the particles are strong and full of gloss
